Mô tả
Mô tả Sản phẩm :
Bộ chuyển đổi tần số 160kw công suất DELIXI CDI-9200
Tính năng sản phẩm
-Được điều khiển bởi DSP hiệu suất cao 32 bit
Đầu ra hiện tại
-13kinds tần số đặt
Truyền thông -RS485
-CE đã được phê duyệt
Bộ chuyển đổi tần số 160kw công suất DELIXI CDI-9200
Tính năng sản phẩm
-Được điều khiển bởi DSP hiệu suất cao 32 bit
Đầu ra hiện tại
-13kinds tần số đặt
Truyền thông -RS485
-CE đã được phê duyệt
Technical Specification of CD19200 Series
| Control | Control method | Control method of space voltage vector | |
| Frequency setting resolution | Digital quantity: 0.0.Hz (under100 Hz), 0.1 Hz (over 100 Hz)
Analogue quantity: 0.05Hz / 50 Hz, output frequency range: 0-400 Hz |
||
| Frequency accuracy | Digital quantity: 0.01% of maximum output frequency
Analogue quantity: 0.1% of maximum output frequency |
||
| V / F curve | Linearity, square root, any V / F | ||
| Overload capacity | Rated current150%-1 minute, rated current 200% -0.5 second | ||
| Torque compensation | Manual torque compensation (0-30%), automatic torque compensation | ||
| Operation | Signal input | Operating method | Keyboard / terminal / RS485 communication |
| Frequency setting | Analogue: 0-10V /0~5V, 2~10V / 4-20 Ma /0-20 Ma
Digital: Keyboard / RS485 communication |
||
| Starting signal | Forward rotation, reverse rotation | ||
| Multi-segment speed | 8 speeds available at most (using multi-functional terminal) | ||
| Time of acceleration and deceleration | 0-60000 second(s). Time of acceleration and deceleration can be switched.
Method of acceleration and deceleration: Linearity, S-type |
||
| Emergency stop | Termination of frequency convertor output | ||
| Inching | Slow operation | ||
| Automatic operation | Automation operation based on setting parameters (7-segment speed) | ||
| Fault resetting | While the protective function is in the effective state, fault resetting can be automatically made. | ||
| Signal output | Operating state | Frequency detection level, overload alarm, overvoltage, under-voltage, overheat of frequency convertor, operation, stop, constant speed, operation of automatic program | |
| Fault output | Contact output: AC 250V 1A, DC 30V 1A | ||
| Analogue output | Select from output frequency, output current, output voltage, VF1, VF2, VF1–VF2 (output voltage:0-10V, output current: 0~20mA or 4~20Ma) | ||
| Operating function | DC braking, frequency limitation, frequency hopping, slip compensation, reversal protection, PID control, etc. | ||
| Protective function | Protection of frequency convertor | Constant speed over-current, acceleration over-current, constant speed overvoltage, deceleration overvoltage, module fault protection, under-voltage, overheat, overload, external fault protection, EEPROM fault protection | |
| Alarm of frequency convertor | Locked-rotor protection, overload alarm, temperature sensor fault | ||
| Instant power failure | Less than 15 milliseconds: continue to operate
More than 15 milliseconds: allow restarting automatically |
||
| Display | keyboard | Operating message | Setting frequency, output current, output voltage, bus-bar voltage, input signal, feedback value, module temperature, output frequency, synchronous motor, etc. |
| Error message | 4 fault messages will be kept while the fault protection is in the running state. | ||
| Environment | Environment temperature | -10oC ~ 40oC | |
| Storage temperature | -20oC ~ 65oC | ||
| Environment temperature | Maximum 90% RH (without condensation) | ||
| Height/vibration | Under 1,000m, under 5.9 meters / second2 (0.6G) | ||
| Scope of application | Non-corrosive gases, inflammable gases, oil mist, dust or others | ||
| Cooling method | Forced air cooling | ||
Đánh giá
Chưa có đánh giá nào.